Double 3D-Diamond Shaping

A diagonal perspective in the two-fold 3D shaping computations works to counteract seam-gathering (ruching) and the effects of the vertical forces across the profile. This achieves an even smoother canopy surface at the leading edge.

Sliced Diagonals

 Riser Features

Line Features

Colour coding 
To make line sorting easier the XI A and brake lines are identified by different colours (grey and red) at the risers. Big ear lines, stabilo lines and the much-handled brake lines have a section of coloured cover running up from the riser end.

Twice coated

Edelrid Magix Pro lines differ from other uncovered versions because they undergo a detailed Thermo Shield treatment and have an additional UV-Protec-Coating, which filters out the sun’s damaging UV light. These finishing processes prolong life, provide resistance to dust and water, and, at the same time, minimise the loss of strength caused by UV radiation.

Very stable length

Compared with Dyneema, Aramid lines, in general, change their lengths very little. Edelrid “Magix Pro” demonstrates minimal stretching and shrinking – within a maximum 0.2 % – and this line has excellent return-to-original properties. Experience shows that paragliders, fully lined with Edelrid “Magix Pro”, do not require retrimming for very long periods. Original flying characteristics are retained even after much intensive use.

Robust dimensions

The use of “Magix Pro” for the XI does not put performance alone at the forefront. Line thickness is similar to that of traditional covereds. This measurement results in considerably higher strength for the same diameter, because the whole cross section shares the load – not just the core. The broad gauge of “Magix Pro” lines delivers longer life compared to similar thickness covered lines.

Inner loop reinforcement

Every XI line has internal loop reinforcement. To achieve this a length of the same line is spliced inside a loop, increasing its line diameter, and thus the surface area of loop to loop contact. This reduces pressure where thin line meets thicker, and avoids the problem of the thin line cutting into the other.

Outer loop reinforcement

Base line loops also have external covers to minimise wear where they meet their quicklink.

The lightweight Performance-Intermediate is suitable for experienced thermal pilots who have, at least, made their first cross country flights and have the necessary feeling for a High-EN/LTF-B wing. Only those who have acquired an active flying style, can recognise the onset of canopy disturbances and know how to react accordingly, will be able to fully make the most of the XI’s impressive performance. Mastery of the usual fast descent techniques for a High-EN/LTF-B paraglider is assume

XI or IOTA 2? Which one is right for me?
IOTA 2: for everyone who does not make weight a first priority and who would like a very robust wing.

XI: for adventurers, pilots who like to walk up to takeoffs, be it for long, ambitious cross countries or Hike und Fly – or the XI’s showpiece: Bivouac flying.

XI compared to the IOTA 2 (pdf)

How do I use the Pitch Control Function?
Instead of controlling canopy pitch by speedbar and steering by weightshift you can use the XI C-Risers directly. The advantage is direct handling response. A Pitch Control Line transmits some C-riser movement to the B-level. Please note that correct and instinctive control by C-Riser needs experience and practice. Pulling them too hard or fast risks stalling!

Which XI size XI should I choose?
If you fly in the normal variety of conditions you should choose the wing whose Seamless Weight Range contains your normal all-up flying flight.

Can I fly the XI outside my Seamless Weight Range?
Of course! The certified weight ranges are wider than the seamless weight ranges and overlap. The seamless (ideal) weight ranges with no overlapping areas just make it easier to choose – in fact there’s no choice required. Flying outside your seamless weight range – near the upper or lower certified weight limits – can influence a wing’s handling characteristics, without affecting your safety. Glider performance remains the same, but climb performance will vary.

Is there anything special about packing the XI?
Like all modern paragliders with leading edge and C-Wires we recommend that you pack the XI cell on cell. We have deliberately shortened the C-Wires for easier, smaller packing (e.g. for reversible harnesses). When packing always lay the nose wires one on the next, so that they lie flat on each other, at the same height. All C-Wires will then be at their own same level. Fold the wing to the width of the inner bag and fold it in as usual (see. pic.): first fold the trailing edge over inboard of the mini-ribs (below the C-Wires), then the leading edge below the Leading-Edge-Wires. Finally fold the leading edge half over the trailing edge end.

Why does the XI have Softlinks? Can I change a line?
We have a lot of positive experience with our light PI BI tandem wing which has Softlinks. They are one tenth the weight of metal quicklinks, for the same strength.

If you have to change a line the ADVANCE Softlink can be opened and closed without problem. No tool is needed. There’s a guide in the manual with the picture underneath. If you are not sure how to do this, or have any question, always ask an ADVANCE Service Centre.

What do I get by registering my paraglider in my MyADVANCE Account?
By registering you benefit from the extended ADVANCE warranty. This is valid for three years for defects that can be attributed to manufacturing faults. You will also be informed about safety-relevant intelligence about your ADVANCE product direct from us.

The XI is made of lightweight fabrics; what effect does this have on its lifespan?
No paraglider should be dragged over the ground, stored wet, left in the sun without need, dunked in salt water or exposed to large temperature changes while packed. This advice applies in particular to a light wing like a XI. If you look after it carefully, you will be able to enjoy your XI for a long time.

• MANUALS
  

  Getting Started

  • Getting Started Guide

  Documentation

  • Manual

  Presentation

  • Product presentation
  • Line Guide